BMX Frames
Fanttik T1 Max Soldering Iron Kit, Cordless Soldering Iron, 7 Seconds Fast Heating(390°F-840℉), Auto Sleep, 4 Precision Soldering Tips(C210), 360° Swivel Stand, Soldering Iron…
$79.99
- Extreme Tinning: Fanttik T1 MAX is equipped with 4pcs C210 (C210-I, C210-IS, 2pcs C210-K) rapid heating soldering tips, long service life, and anti-oxidation. You can achieve fast heating/reheating time, where the fastest time is 7 seconds. Consequently, it reduces the waiting time and improves the efficiency of your repair tasks. Also, with its solder sucker and precision tweezers, you can carry out soldering tasks smoothly and securely.
- Compatible DC/AC Modes: With the powerful built-in 2600mAh battery in wireless mode, the maximum DC Output is 11W for up to 60 minutes at 840°F (450°C). Its small size is not bound by space, and maintenance work can be carried out anywhere. In wired mode, the maximum AC Output is 16W. It can be powered by a charger or mobile power supply with a Type-C port.
- Intelligent Gravity Sensing: After powered on, the soldering iron stand still for 15 seconds will enter sleep mode. Fanttik T1 MAX will automatically restart to heat up to the temperature you set when picking it up again. NOTE: The red light will flash when heating, while the green light is always on when heating is finished.
- 6 Temperature Levels: The tail knob of the soldering iron has 6 levels for adjusting the temperature. The temperature can be adjusted accurately and efficiently for different work scene in the range between 390°F and 840°F (200°C – 450°C) so as not to damage heat-resistant components.
- Stability is Baked in with Exquisite Build: Equipped with an aluminum storage space, the enclosed compartment can be pressed to pop up to store the welding head while being super sturdy. On the other hand, the exquisite industrial design allows the soldering iron to be displayed on the table like an aesthetic piece, keeping the workbench clean, beautiful, comfortable, and pleasant.
Good Day –
Works great, much better than I’d expected for a small iron. Wish the tip was larger. Does a great job warming up fast and soldering
Good Day –
Amazon Customer –
It works! and it works well. It very sleek , heats up fast. Nice precision tips. I only used it. today so the next test in longevity . We’ll see
Amazon Customer –
Moe –
The balance of the iron was quite hard to manage. The whole body is a battery so to hold it close to the tip it made it hard for the tiny components. The temperature also seems to be off – might be because the tips are so small that you need it to be hotter. In any case this wasn’t for me.
Moe –
Matt_d77 –
This is a nice unit for circuit board soldering. The tips are fine allowing for precise heating when things are close together. Might not be powerful enough for heavier metal soldering like patch cords and similar scenarios that require high heat.
Matt_d77 –
Sephora Laplante –
Fast, sturdy, great design, portable, easy to swap tips, etc. Overall, it is great.
Sephora Laplante –
JPasos –
Great soldering device, very comfortable, cordless, and heats fast.
JPasos –
habworks –
The original unit did not work consistently. I posted a review with 1 star. I was subsequently contacted by the seller and with fast and amazing support – the issue was corrected. I now have a working unit. The Ergonomic design is amazing, just feels right. And the unit does what it is supposed to do which is solder with clear indications as to warming up, ready, and paused. The LED work light is a nice touch. Totally satisfied with the order and with the customer care experience.
habworks –
Chucky D –
It’s lite weight. Easy to hold and use. The light at the tip makes it easy to to see what you are soldering. Can be used wired or wireless. Like that it’s USB-C. Unlike the old corded ones having to worry about the cord. This one you can change the temperature on it. Without paying a lot of money. When you’re only going to use it a few times a year. What more can I say. For the price you can’t beat it.
Chucky D –
Shiv –
This is by all means a very good portable soldering iron but please remember this is low wattage and meant for small jobs, maybe small caps, resistors, wires, etc. Anything that draws a decent amount of heat from the tip this iron would not be able to keep up, because of the low wattage. Don’t get me wrong, this has a lot of uses as is but even cell phones have relatively large ground plane.
The upside is it’s well made and portable, charge lasts a long time and the tips are so small you can get into tight spaces.
The only downside for me is that I can’t just throw this in a bag with the tip inserted, there’s no cap to protect the power button and tip from damages and switching on, it looks like it’s meant to stay in the stand, with the stand it really isn’t portable anymore. Even though you have to long press for heat up it still could accidently switch on.
So anyone interested in this please for your safety I personally emplore you, it may not happen but a large margin for accidents still exists for this thing to switch on when not transported properly, I would urge you to first remove the tip as that would take away this concern entirely….
Shiv –