Bike Workstands
repair bike stand Bike Parking Stand bicycle stands for bikes bicycle display stand bicycle maintenance，bicycle stands for bikes,Black
$30.99
- STURDY – MAX LOAD:55 lbs(25kg).The bicycle parking is made of high-quality carbon steel.Four legs supports for more stability. It can easily withstand the most bikes.
- MULTI PURPOSE – The bike parking stand can be used as Bike Repair Stand & Bike Parking stand & bike display stand.It can be used to finish simple bike maintenance support.
- ADJUSTABLE HEIGHT – Quick rotation, convenient and fast.You can slide up and down to adjust height,after confirming height ,tighten The nut.
- SOFT PAD AVOID SCRATCH – The hook is wrapped in ABS soft pad,which does not damage the bicycle frame.
- THICKENED RUBBER DESIGN – Non-slip rubber base increases friction and makes parking more stable.
- PROFESSIONAL CUSTOMER SERVICE:The product is Easy to install in about 5 minutes.Since we are factory sale,Please feel free to contact our professional service if you have any questions.
Bruce Ambrose –
The media could not be loaded.
Thought it was full size one and yes I shouldve work my glasses but almost $30 for this. Not well made and bolt that connects both metal pieces sound cheap and its not straight
Bruce Ambrose –
Jonathan Stein –
a
Jonathan Stein –
KW –
Could have had 5 stars… All it needs is a series of holes instead of the long slot to position the hangers. But it does work, sorta! It will hold two of my three bikes very steady…. It will work on all of them once I disassemble it and drill the necessary holes so the hangers will line up with the chain stay.
KW –
QUALITY WINS –
I recently snagged this Bike Repair Stand, and let me just say, it’s been a total game-changer for my biking routine First off, the sturdiness is no joke. With its carbon steel construction, this stand can easily handle my mountain bike without breaking a sweat. And the four-leg support? Rock solid stability right there.
What’s super cool is how versatile this stand is. Whether I need to fix something up, park my bike indoors, or just want to display my ride, this stand does it all. It’s basically the Swiss Army knife of bike stands
Adjusting the height is a breeze too. A quick twist and slide, and I can get it to the perfect level for whatever task I’m tackling. Plus, the tightening nut locks everything securely in place.
I’m always nervous about scratching my bike, but the soft pad on the hook totally puts my mind at ease. It cradles the frame gently without leaving a mark. And the thickened rubber base? No slips or slides, just steady and stable parking.
Setting it up was a piece of cake – I was up and running in about 5 minutes, which is a huge plus in my book. And knowing there’s a professional customer service team ready to help out if I need it? That’s the cherry on top.
All in all, this Bike Repair Stand is a must-have for any cyclist looking to make maintenance and storage a whole lot easier. Thumbs up from me 👍🚴♂️
QUALITY WINS –
Andrew Singleton –
I had thought this might work to hold the whole bike and it kind of does for a 20″ bike, but it is a bit precarious since the hooks don’t clamp on the fram…it just sits on them. Plus, it doesn’t seem to be designed to handle that much weight. Really this is for holding the rear wheel off the ground by hooking to the rear forks lower and upper arms to lift the rear wheel off the ground. SO naturally it is smaller than the full size bike stands that hold the whole bike off the ground. This is about 30″ tall at the highest point but that is good enough for all sizes of rear tires. Allows the tire to rotate while working on the bike which is very handy. It is ok overall, just wish it was bigger and held the whole bike instead of just the rear wheel since you can’t spin the pedals all the way around because the post gets in the way.
Andrew Singleton –
Andrew Singleton –
Would not hold bike and my bike is very light and it kept falling over
Andrew Singleton –
Bruce Ambrose –
THE COUPLING OF TWO PARTS THAT SUPPORT THE TRYKE, IS NOT PROPERLY FITTED. THE COUPLING OF TWO VERTICAL PARTS WOBBLES, DUE TO A BAD FIT OF THE TWO VERTICAL COMPONENTS; WOBBLING WILL ADVANCE A PREMATUREFAILURE OF THIS UNIT. THE UNIT IS USED ON A TRYKE, TO RAISE IT OFF THE FLOOR AND TO ALLOW SPINNING OF THE WHEELS TO ADJUST THE BRAKE CALIPERS
Bruce Ambrose –
Chicago Matt –
Holds my big box bike steady in spite of what feels like a wider frame tubing than typical. Assembled easy enough with the included tools, though I will note the screw that holds the two pieces of the upright together did not thread in completely. Pedals turn freely which is the entire point of the stand.
The feet are not rubber they are plastic, but fortunately the hooks making contact with the bike are sprayed with a rubberized coating to prevent paint chips and scratches. Nowhere near as good as a full sized stand in my opinion, but it gets the job done on the cheap when space is at a premium.
Chicago Matt –