Bike Shop Tools
Oumers Bike Chain Repair Tools Set, Bicycle Link Plier, Chain Drift Tool, Chain Checker Chain Wear Indicator Tool Opener Closer Remover Pliers Tool Drift Chain Bicycle Tool Set
$12.99
- KA Bike Repair Tool Set–Match perfect for all your bike chain repair
- Bike Link Plier– Used for quick removal of join links, advanced tool for both open and close, chain Master Link Remover and 2 in 1 connector
- Chain separator tool–very smart design, which easy to break, easy to re-chain–unique groove on the top make it easy to see how well you have the peg noise out and remove the cut chain with the peg out of the tool
- The bicycle chain wear indicator tool–can allow you to quickly evaluate the wear and stretch of chains, help you decide whether to change a new one or not
- PRO QUALITY–We are so confident about the quality of our products that if you have any product issues, we are very happy to provide a refund or replacement!
Martin Wenner –
Great value tools, just what I needed to change the chain on my bikes
Martin Wenner –
Best and only levers you’ll need –
Works, hard to handle but it does its job
Best and only levers you’ll need –
KF –
Tried to work on bike chain without proper tools for about 1.5 hours. All was going ok until I had to push out one of the chain link pins. No bueno. Saw this several-piece chain tool kit for well under what my local bike shop has to charge for even one of these tools, and decided to go for it. Everything was just as advertised and very solid/sturdy and effective. Had the bike chain fixed in literally 10 minutes. It is the kind of tool I may use maybe 2 more times before I go to Heaven (I should have at least 30 more years!), but at such a reasonable price, I’m so glad I pulled the trigger! Kinds makes me want to ask my neighbors if they need any chain work done – now that I have effective tools, I wanna do more!
KF –
Taff “B” –
Den enskilda delarna håller hög kvalitet och är mycket välgjorda. Jag blev till och med förvånad över det låga priset med tanke på hur bra de saker som ingår är, när jag öppnade paketet. Varje del fungerar felfritt. Instruktioner ingår också för varje del. Kedjebrytaren fungerar perfekt. Tången passar kedjor perfekt. Tidigare tog det mig lång tid att byta cykelkedja, nu gick det på 5 minuter, Jag borde köpt ett sådant här paket för länge sen istället för att svära över att jag inte hade rätt verktyg. Enkelt 5 stjärnor.
Taff “B” –
Outback in Idaho –
Was installing an Efneo front drive on a recumbent trike and needed more than a low-profile chain breaker. While I do EDC a Victorinox Spirit X (purchased last year from Amazon) had figured perhaps I should also get master link pliers too, So while searching on Amazon I found this Oumers kit that also included a much desired chain wear tool too.
Was expecting to pay $30 alone for a quality chain breaker, but got a great deal as a package. And I did compare with other items on Amazon, and also offline reviews before making a selection.
Used the Oumers chain breaker on some KMC X8.99 chain I also purchased with this kit. The links were a bit more stubborn, so I found that using a leather glove to get the initial hard press the rest was easy.
What I do like about the Oumers chain breaker is that the shelf has an adjuster to fit the chain, something other chain breakers don’t do. And this tool came with an extra bit, which was an added plus! And a wire to keep the chain ends from slipping away. (grin) Use extra wire as a backup if you’ve not done this before, or if you have a ‘helpful’ friend. (grin)
So for breaking the breaker is fully adjustable, aligns near perfectly – does not angle off, and the press works great. Did not have any issues with the Oumers chain breaker or the rest of the tools. Which is a BIG PLUS for me, as stuff does not always go as planned. No worries here!
Oumers chain wear tool showed me there was still life in the previous KMC X72 which had roughly 3,000 miles on it pulling near maximum load (475#). That is impressive for an inexpensive chain. This time around I went with a chain with more plating as I ride in any condition.
And for those pliers. Oh how may times I used those pliers! They were better than the Spirit X and was adding and removing the Missing Links that came with the KMC chain. While I do want to put the chain together the proper way, without using the master links, I need a bit more practice. And I have an older chain (that is still usable) to practice with using these Oumers bicycle tools.
If you are on a budget and need a quality kit that works, no gimmicks, and gets you done and down the road, get this Oumers kit. Even if you do not use the chain measuring tool right away, it is still worth the extra few bucks because you will be needing one later on.
Bonza tools!
Outback in Idaho –
simmmm –
Das wichtigste Teil in diesem Set, der Kettennieter funktioniert sehr gut und erledigt einwandfrei seinen Job.
Falls der Dorn, der die Niete heraus drückt, mal abgenutzt oder abgebrochen sein sollte liegt ein zweiter als Ersatz bei.
Die Zange für das Kettenschloss funktioniert ebenfalls sehr gut und das Kettenschloss ist damit schnell geöffnet oder wieder verschlossen.
Es gibt zwar verschieden Möglichkeiten so ein Kettenschloss zu öffnen aber mit dieser Zange ist es definitiv die einfachste und schnellste.
Die Kettenlehre scheint auch ok zu sein, zumindest rutscht sie bei meiner alten Kette, die aber auch schon viel zu lange gefahren habe, komplett durch und bei zwei neuen Ketten nicht sondern liegt oben auf. Ob das Teil allerdings genau misst kann ich allerdings nicht sagen.
simmmm –
Outback in Idaho –
These tools helped a lot when I was putting a new chain on my bike. Would recommend
Outback in Idaho –
Jason Faragher –
Buon prodotto è il classico set di attrezzi che finché non ne hai bisogno non prendi in considerazione ma è necessario per la manutenzione generale delle bici moderne. Il prezzo è ok!
Jason Faragher –
Gracy –
Used the wear tool to verify my chain was worn, then used the pliers to separate my old chain and later to connect my new chain via KMC Missing Link, and the chain breaker to size my new chain. Everything did the job I needed them to do.
Gracy –
KS –
Works great! I’ve never replaced a chain on a bike before and was able to take off an old 14 year old chain of the bike, cut a new replacement chain to size and install a new one using the tool set. The process was very easy, granted I watched youtube videos on how to do it before attempting the replacement, so I sort of knew what needed to be done, in theory. Using a breaker you just need to be sure to line up the pushing pin with the chain pin, so there is a path to push the chain pin out, otherwise the pin could go sideways and get stuck in the breaker tool. Pliers are super convenient to install the new chain link or take off an old one, if your chain has one.
Quite pleased how quickly the whole replacement went.
KS –
Benji –
I have replaced several chains with these tools and I would say that I haven’t found any issues with them. They were a great purchase. They look and feel durable and they’re very easy to use. Would recommend
Benji –
Alyssa Loredo –
I’m not used to using tools because when I was younger, we would should just pop chain links off but this tool was easy to use and made the job go by much faster
Alyssa Loredo –
Abk2950 –
All 3 pieces work fantastic. The chain checker is simple to use, the chain pliers worked well with the standard missing link type chain. The chain breaker did it’s job too – and includes a handy chain holder to keep the chain from falling when the pin is out.
Abk2950 –