- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
ridebmx4130 –
It’s a little chintzy and made of poor quality materials, but it does the job it needs to do perfectly. For me, that is holding an iPad on my bars for use with Zwift. Easy on, easy off, and very stable while in use.
ridebmx4130 –
Bike Rider –
Does the job I hoped it would. Easy to install (if you make sure to “open” the clasp to the right size for the handlebars with a small wrench which took me a minute or two to realize was necessary). It holds my iPad fine and securely enough. I like that it extends out in front of the handlebars (many of the other choices did not), but wish it extended a bit further to give more space on the handlebars for my hands. Overall, I think it was the best choice given the others I saw on-line.
Bike Rider –
Amazon Customer –
Se ajusta perfectamente y mantiene la tablet en una posición como y segura delante del manillar (no encima como otras opciones) y puede ponerse en modo retrato o apaisado según necesidad.
El ajuste al manillar es de metal (no de platico como otros) lo que permite ponerlo y quitarlo con la seguridad de que no va a romperse. El mecanismo de enganche permite poner y quitarlo con rapidez y comodidad. A pesar de lo indicado en las especificaciones, puede sujetar un tablet de 10.1″ (Sony Xperia Z4), os recomiendo mirar la longitud diagonal indicada para ver si os sirve a vuestra tablet.
Aunque el ajuste al manillar es ajustable, el tamaño del mio es inferior a la dimensión mínima, he reutilizado dos piezas de mi antigua trainer para completar el diámetro.
Una vez montado a tu gusto, coge la llave allen y aprieta todas las partes para asegurara que queden fijas y no se te muevan al pedalear fuerte, son varios tornillos ya los iras viendo
Os lo recomiendo, coloca la tablet en una posición muy cómoda para el ejercicio.
Amazon Customer –
Bruce W. Stebbins, Nature Center Director –
Pure junk! Purchased to mount my iPad on my bicycle for indoor training on Zwift. Seemed to function well enough for the first few rides, but when I attempted to mount iPad to it again the robber end pieces repeatedly buckled and popped free of the iPad causing it to fall onto floor. There is no tension adjustment and it appears the rubber end pieces or the tiny screws holding in place are inadequate. Now I have a $35 apparatus with no apparent use. Don’t buy!
Bruce W. Stebbins, Nature Center Director –
ピナPARIS –
Tacxのホルダーはドリンクホルダーとかついてるし頑丈そうだけど、iPadを縦置きに出来なかったのが痛い。ちなみに、もう売っていないのも理解出来る。
今回のはシンプルな構造で、値段もTacxのホルダーとほぼ同じ位なのに、縦でも横でも使えるのが良い。
ハンドルに取り付けるのも、いつものミノウラ製品と同じ構造なので、取り付けやすい。
買った直後での感想は、「買って良かった」です。
ピナPARIS –
DRM –
Really like this stand. Fits snugly on my Trek fitness type bars. Holds my mini IPad securely during indoor trainer workouts. One thing that I found on the unit that I received is that the silver hex screws are not of the best quality and are easy to strip. I was able to tighten them but with some difficulty. I still like the stand and will just replace the hex screws if it becomes necessary.
DRM –
Amazon Customer –
It fits the purpose perfectly.
The grip to the handdlebar is made of metal therefore it graps strong and last longer, the clip system makes easy to put and release. In spite of specs, it can hold tablet of 10.1″ (Sony Xperia Z4), so I recommend to look better for maximum diagonal opening.
Although grip dimension is adjustable, my handdlebar size was smaller than minimum grip dimension, I use two pieces from my former trainer manual trainer control to complete diameter.
I fully recommend
Amazon Customer –
dobbe00g –
Die Klemmung am Rennradlenker paßt perfekt, ist sicher fest und auch schnell wieder zu lösen. Der Haltearm ist stabil. Ohne Hülle wird das 10-Zoll Tablet schön festgehalten, allerdings nur an zwei Ecken. Ich verwende den Halter nur auf der freien Rolle zum Training in Zwift, wo es naturgemäß nicht holpert. Draußen auf der Straße wäre mir das Tablet aber nicht sicher genug befestigt – brauchen aber auch nur die wenigsten, denke ich.
dobbe00g –
Tim Canan –
This is advertised as compatible with tablets 7.9 to 9.7 inches. But it ships with long arms that start at about 10.5 inches across and extend to about 12.5 inches. It also includes separate short arms that it says should be used for tablets with diagonal size 215 mm to 280 mm (8.46 inches to 11 inches). But in order to install the smaller arms to fit the size that is actually advertised, you have to take the entire thing apart with 8 screws and rebuild it. This is after having to take apart the entire mount and rebuild it to get it out of the packaging.
I think what they meant on the reported sizing is the viewable screen size of the tablet, which is smaller than the outer edge size the mount attaches to. Seems like this should have been more clear, and I probably would have bought a different smaller mount if I knew I was going to have to take the entire thing apart and rebuild it to make it work.
My tablet: iPad Mini 4, size 8” x 6.3”, diagonal about 9.3”, viewable screen 7.9”. Fits securely with short arms installed.
Tim Canan –
giambattista Borriero –
Mi alleno indoor bike 3 4 volte a settimana e il prodotto ha soddisfatto le aspettative.
giambattista Borriero –
bretski –
This is a very good quality tablet holder. Spring-loaded clamp securely attaches to handlebars. There is an included vinyl strip to help prevent marring.
Out of the package, it’s setup for a larger size tablet. Spring loaded clamps with rubber ends hold the tablet in place. For smaller tablets, like mine, there is a second set of clamps included in the package. Easily swapped out in 10 minutes with a fine point screwdriver.
Swivels easily between landscape and portrait orientation. There are 2 hex screws that can be tightened down to prevent swiveling if desired. With my bike in the trainer, I find that they require tightening about once per week, due to vibration. Not a big deal though. The clamps hold my Lenovo tablet very securely. No worries at all about it coming loose.
Highly recommended.
bretski –
D Settergren –
Easy to install and remove. Works great–holds my Surface Pro (original model). It can also hold a small keyboard instead of a computer.
D Settergren –
fernandez –
Definitely solidly built, as expected from a company like Minoura. Mounts are well designed and it holds my iPad Air solidly in position.
However, they don’t work for my set up at all because no matter where I position the incline and rotation of the tablet my hands still hit it on the sides when switching from the hoods to the top of the bars.
If you don’t change your riding position much, have handlebars wider than a 40cm, are ok with always using portrait mode, or have a tablet smaller than 9″, this will probably work fine for you. If any of those things concern you, then this holder might be more of an exercise in frustration.
fernandez –