Greallthy Bike Bell Classic Brass Bicycle Bell,Bike Bells for Adults Kids,Loud Sound Bicycle Bell Fit for 0.87-1.25in/22.2-31.8mm Bicycle Handlebars,Road Mountain Bike Accessories.

PROS:
– All metal construction (including handlebar clamp), so it won’t break.
– Comes with two sizes of handlebar clamps and two foam inserts (one thick, one thin) to ensure a good fit with just about any handlebar. Foam inserts also protect the handlebar from being scratched by the metal clamp.
– Nice, loud ring, the loudness of which can be varied by how far back you pull the striker before releasing it.
– Adjustable distance between striker and bell to allow for lighter strikes (and slightly quieter ring, if preferred).

CONS
– The striker lever is bare metal with a rather coarse edge, which causes your thumb pad to feel a little raw and sore after just a few uses. Mitigated by using your thumbnail or inner part of the knuckle to pull the striker back. Would have been much better with a silicone cover or other similar soft/cushioned cover.
– Screw for tightening the clamp must be screwed in from the bottom. This makes installation more difficult than it has to be and results in the stem of the screw sticking straight up through the clamp. Would have been better to have the clamp screwed tight from the top, making installation easier and resulting in a nice, flush screw head visible with the screw stem nearly invisible.

It’s a decent bell, but, if I had to do it all over again, I would probably go with one that was easier on the thumbs.

Muy fuerte y resistente. Buen sonido y fácil de poner y usar para una niña pequeña

Excellent item. Has a pleasant audible
sustaining ring.

Sick and tired of plastic that just breaks, a bell that’s entirely made out of metal. I sounds nice and loud too. It comes with two different size mounts and they also give you rubbery spacers. This means this should fit onto any size. My bike has a pretty thick steering thing, and after mounting the larger mount, and using the thin rubber spacer, it went on nicely. The included tool handles the screw perfectly.
Nice to have a quality bike after buying a quality bike.

This is a great bell–and an excellent value here on amazon. I purchased two of them (one for my wife and one for myself). It has a small footprint, however it produces excellent (pleasant) sound with great volume. It is constructed of high quality materials and fit both of our bicycle’s handlebars just fine–this even though one bicycle had 21.5 mm handlebars and the other 22.5 mm handlebars. The included rubber inserts (two thin ones, and two thick ones) allows this bell to fit a wide range handlebar thicknesses. Oh, and a nice little Allen wrench is also included. One can actually reduce the volume simply by not pressing down so far on the thumb trigger. We use this method on quieter smooth/nicely paved bicycle paths. If we need a louder volume, i.e., for those walkers/riders using earbuds, etc., we simply press the thumb trigger all the way down and then release it, thus causing the same pleasant ringing, albeit being much louder. There are a few comments by people saying this bell is difficult to install. Nonsense! It literally take less than five minutes! Do yourself a favor and purchase this bell. You will not be disappointed.

ottima fattura! bellissimo sia in estetica che funzionalità. Suono molto udibile anche da lontano!

A unique, piercing ring that wows. What I mean is that after striking the tab, the volume keeps increasing for about two seconds, then sustains for another ten. A literal bell curve of sound. Thick brass and solid anchor really makes it ring. Pun intended. After many years of urban MTB commute, this is the first bike bell/horn that I can actually stand.