Cycling Computers, Cycling Electronics
CITYWAY for SmartTag2 Bike Mount, IPX8 Waterproof Bike GPS Tracker Holder for Galaxy Smart tag2, Hidden Under Bottle Cage or Alone, Extended M5 Black Safety Screws with Driver…
$14.99
- Compatible with SmartTag2 only.
- 【Unbreakable】The SmartTag2 Bike Mount is made of high-strength material with a sturdy and durable structure, which can be firmly fixed on the bike and is not easy to be cut or pried off.
- 【Hidden SmartTag2 Bike Mount】The black screws and discreet placement make SmartTag2 virtually invisible on your bike.
- 【IPX8 Waterproof】There is a Waterproof Ring, water won’t leak through the seams and ruin the air tag itself. Keep SmartTag2 clean and dry.
- 【Anti-theft】 The screw requires a custom wrench as it has a small stud in the middle that prevents typical Torx screwdrivers from removing it. The included security screws are long enough to accommodate most bottle cages you’ll encounter. (Torx Allen Wrench Included, don’t lose it!)
- 【What You Get】1x SmartTag2 Bike Mount Case (upper and lower half), 1 Waterproof Ring, 2 x 28mm Ultralight & Extended M5 Black Security Screws, 1 x Security Wrench, 1 x User Manual.
David Manevich –
Great place to hold and hide my smart tag on my bike. Bottle holder sits perfectly on top no way to even know its there
David Manevich –
H –
El soporte para bicicleta SmartTag2 de CITYWAY, es parte del programa Amazon Vine para la revisión honrada de productos por clientes y no condiciona en nada la valoración del mismo.
Hoy día el robo de bicicletas están a la orden del día, los cacos lo saben y saben lo fácil que resulta hacerse con el botín, y más cuando algunas buenas bicicletas de marca y calidad, llegan a costar varios meses de duro trabajo. A un vecino mío, le entraron al garaje y el robaron su bicicleta de más de 3000 euros.
Quizás no podamos disuadir o evitar el robo de la bicicleta, pero si la posibilidad de geolocalizarla gracias a los SmartTag, en este caso 2, que gracias a Samsung nos vincula a nuestro dispositivo y nos dice exactamente donde se encuentra. (El diseñador solo pensó en Samsung y dejo fuera a Apple, una pena porque igualmente hubiera ampliado mercado).
La instalación es fácil y solamente tienes que incluir el soporte entre la sujeción del bidón y el chasis de la bicicleta, usar los nuevos tornillos especiales (trae una llave de seguridad con pitón para dificultar la apertura) o los anteriores si dan juego y a olvidarse por un tiempo.
El sistema no soluciona el robo, pero al menos lo dificulta; esta bien pensado puesto que al quedar entre el soporte del bidón y el chasis, cerrado con dos tornillos de seguridad, aunque el soporte sea de plástico duro, eliminar la geolocalización es más dificultoso y por tanto, los cacos optarán por otras que no les den tanta guerra.
Por todo estos detalles, mi consideración es de otorgarle cinco estrellas en función calidad/precio/utilidad.
Gracias por leer, espero que esta reseña te sea útil…
… Nos leemos ¡hasta la próxima!
H –
K. Glenn –
I’ve been using a 3D printed tag holder for a while now. But the last time I changed the battery in it I noticed water inside.
This is way nicer than the one I printed. And even has a rubber seal that should keep any water out. A bit smaller than my printed one too, so it blends in better. My galaxy tag fits inside nice and snug as well. And even with a full water bottle, it’s very secure. No wobbling about once tightned to the frame and bottle cage.
Haven’t noticed any signal drops either. My tag is perfectly detectable detectable when inside the holder.
K. Glenn –
John Atkins –
It’s small, subtle, and well made, with theft resistant Torx bolts so a thief would require an (admittedly easy to get) security Torx driver to non-destructively get this off a bike. The Smarttag2 is actually IP rated already, and when putting the case together, I was skeptical that the o-ring was actually doing anything. I did a quick, unscientific test, and yeah, this thing kept water from entering the tracker compartment when fully submerged in water. I’m planning on buying another for my other bike, and might adapt it with my own hardware for other stuff I own. This feels like a really good solution. It does raise the bottle cage slightly, so maybe consider a side-entry cage if you find it hard to get bottles in and out of cages after installation.
John Atkins –
Mike –
It gets the job done and keeps my SmartTag2 safely attached to my bike while also making it easy to get to in case I need to swap out the battery. I didn’t mount it under my bottle cage because I had a few extra mounting points on my frame. I’m not too worried because it comes with two security torx screws that require a special tool to install and remove. If you don’t have spares of these lying around in your toolbox, make sure to keep track of the one they give you. In my experience these aren’t foolproof and can be removed by breaking the security pin with a flat head and using a standard torx bit. But most people won’t know that and I still feel safe using this without hiding it beneath my bottle cage.
Mike –
Gijs –
Le support est bien ajuster aux smart tag de chez samsung.
Ah voir si ça reste étanche avec le temps.
Gijs –
John Atkins –
So I am so glad I found this. Great way to add a Samsung Smart Tag to my bike without it just sitting loose in a bag. I like that the case has some additional protection against the elements which is great for the type of riding we tend to do.
The unit comes with the case, o-ring/seal, two tamper resistant screws, and the wrench for them.
I installed this under the water bottle cage to try and hide its presence. That works somewhat well but does take away from the area that the bottle can fit. This bike has a tighter frame opening but still works well. You may not want to do this on some other bikes. I will be re-positioning this to the unused vertical mounting spot on the seat post tube. You will 100% see it but hopefully the screws give it some time to register its location before any thief figures it out.
I wish this was a little more low profile but there is nothing that can be done about that given the dimensions of the tracker itself.
This would be a must have is you are a bicycle commuter. Nice to have an option for my Samsung tracker.
John Atkins –
Anónimo –
Ho preso per sbaglio questo scomparto segreto per nascondere l’airtag al suo interno, e metterlo sotto il portaborraccia della mia bici, in modo da lasciarlo lì e sapere sempre dove si trovi, soprattutto nel malaugurato caso che me la rubino.
Peccato che ho sbagliato a prendere l’oggetto e quindi l’airtag non ci sta: ci sta solo lo smarttag della samsung.
Accidenti a me.
E me ne sono accorto solo dopo averlo montato sul telaio…
Quindi posso comunque dare un’ottima recensione al porta smarttag poiché è fatto bene, ci sono anche le viti di ricambio se quelle originali non vanno bene.
Soddisfatto al 100%
Anónimo –
Anónimo –
The plastic got teared & damaged instantly.
Be very careful using this without breaking it.
Anónimo –